Lenovo Laptop Won’t Turn On – An Ultimate Troubleshooting Guide

You don’t need to worry when you hit the power button, and your Lenovo laptop won’t turn on. It is a common problem; you can bring your laptop back from hibernation with this comprehensive guide. If your laptop is not turning on from standby or sleep mode, this can be worrisome, but there is a solution to every problem.

Before reaching the solution, you must figure out why this malfunction exists. There are different reasons why the laptop stops turning on. This problem might be due to hardware or software problems that require a technician, and you can’t fix them on your own. You might need to get expert help, but there are some common issues that you can fix at home. Sit tight and read through the article’s end to get the proper solution to turn on your Lenovo laptop.

How To Restart a Lenovo Laptop that Won’t Turn On?

When you keep pressing the button, but your Lenovo laptop screen won’t turn on, there is a possibility of a hardware problem. If the problem is internal such as hardware or software, you can’t fix it at home and need a professional to fix it.

Don’t think about playing with your laptop’s internal parts to fix it if you don’t have any knowledge. Other than hardware and software problems, you can fix your laptop at home by knowing the issue and finding the remedy. You might be able to solve the problem without even visiting the repair shop.

Here is a list of problems that you might be facing;

Fixable Hardware Issues

When your brand-new Lenovo laptop won’t turn on, you first need to check its hardware; there might be a problem with its hardware.

1. Stability

Check if the hardware is intact and stable; if there is a minor issue in the hardware, it can cause significant problems. All the hardware components should be in place, and there is no burden of data on the hardware. You need to lighten up some data from your laptop to provide an open space for the hardware to work correctly.

2. Overheating

If your laptop is too hot when you touch it, overheating is the cause. Unplug the laptop, keep it in a cold place, and switch it off. Proper ventilation should be near your laptop before you turn it on.

You can also use your laptop’s cooling pad to control the temperature. If there is a constant overheating problem with your laptop, this cooling pad and better ventilation will solve the problem, but if the problem persists, it can lead to severe damage to the hardware.

3. Frayed Wires

Frayed wires are also hardware problems that need proper focus; if you ignore them, they can cause severe damage to your laptop. Frayed wire can affect the charging cord, and if there is a problem with the charging cord, your laptop’s charging will never complete, and you will have to use it with a charger on all the time.

You can change the charger to check if there is a problem with the laptop or the charger. If you find a problem with the cord, you can buy a universal Lenovo charger that works with all Lenovo devices.

The frayed wires are one reason the Lenovo laptop won’t turn on with no lights; this can lead to the battery stopping charging, and whenever you think the battery is complete, it is not because it lacks battery power now.

4. Poor Battery life

If you notice defective batteries constantly, even after changing the charger, there might be another reason. Your battery packs are not intact and working correctly, which will not let the laptop battery charge to its whole. If you have a removable battery, ensure that its attachment is correct.

Please don’t shake your laptop, and make sure its battery is intact and fastened to the ports correctly. The battery has components such as pins, terminals, sockets, singes, rust, and dust build-up.

You need to ensure all these components are working and in good shape. If any of these components is not working fine, you must replace the whole battery. If your Lenovo laptop won’t turn on no removable battery, take it to a technician. He can tell you the actual problem with your laptop.

Operating System Issue

There might be a problem with the operating system that is causing your Lenovo laptop not to turn on. There is a possibility of malfunctioning with the windows; due to this reason, you might have to disable the auto turn-on feature from the setting.

There are usual bugs and glitches with the windows that need to be solved. Usually, when there is an update, it comes with many bugs and glitches. In Windows 11, the in-house MS developers faced many problems, and now they are improving the software and working on them.

When you try downloading new windows for your laptops, there are different pirated versions of windows spreading on the internet. These windows are corrupt, and one of the reasons is causing your laptop not to start.

They are known as pirated software and have tools to damage your system files. You will have to take out all your data in a USB or flash drive and then reinstall windows with the help of a Live USB drive.

How to Fix Lenovo Laptop Won’t Turn on Problem?

Different reasons are the reason that you won’t turn on your laptop. Firstly, you need to find out the reason behind this problem. If there is a hardware or software problem, you need an internal fixture. If we divide the problems, we get the following;

• Check the charging of the laptop
• Check if the screen is blank or off
• The power button is flashing or not
• Power LED light is blinking or not
• A laptop backlight is on or not

These are the commonly reported problems by Lenovo users, and there is a solution to each one of these problems. Some of the solutions to these problems include;

Try Power Draining

If your Lenovo ThinkPad is not working, there is something you can do to bring it back. It would be best if you supplied reliable power draining to make your Lenovo ThinkPad work. You can power-drain your laptop whenever it is not turning on.

Before power draining, turn the laptop off by unplugging it, pressing the power button for thirty seconds, removing the batteries, reconnecting and returning the laptop’s power sources, and then turning it on again.

Reset Your Lenovo Laptop

If your problem persists after trying the above method, you need to press the reset button to make it work properly. A reset button is available on the laptop’s external side; you must press it to reset it completely. Follow these steps to reset your Lenovo laptop;

• Shut down your laptop with the power button.
• Disconnect the power source and unplug the charger carefully.
• Find the reset button on your device; there has to be one.
• Press the reset button with a small, safe, and sharp tool. You can also use a blunt paper clip or anything like that.
• Hold the button for approximately 10 seconds.
• Now, turn on your laptop.

Check Internal Batteries

Resetting your laptop is perfect for turning it on if it is not working fine. You will have to check your internal batteries to make this trick work. You might need an expert or a technician as this work is dismantling. If your Lenovo laptop power light blinking but won’t turn on, you must drain the battery fully.

You will have to use some tools to open your laptop and drain the battery. Draining your laptop’s battery is like a surgical operation on your laptop; you need to be super careful while dealing with the laptop’s internal parts. Follow these steps to drain the battery;

• Power off your laptop and unplug the charger after switching it off.
• Remove the bottom cover of the laptop and dislodge the internal batteries. For this purpose, you don’t need to remove the external battery as they have a connection with the internal ones. You will have to remove the external battery supplement to attach it to the unit.
• Press down the power button for 20 seconds.
• Replace the batteries in the system and place the cover or panel back on the laptop.
• Reconnect the laptop back to the power source.
• Turn the laptop on to check the working.

It would help if you had the proper knowledge, technical skills, and tools to operate several functions and take care of a laptop. You might be able to solve your problem with the solutions mentioned above, and if you cannot find any solutions, you can watch YouTube videos to fix your laptop’s issues.

Try Different Operating Systems

If the problems are in the operating system, you need to fix them before it causes a hardware failure. Different operating systems are free of bugs and glitches and work perfectly fine without any problems.

The Linux operating systems such as Kubuntu and Ubuntu are late operating systems; you don’t need to worry about their drivers, programs, and the unique features of Lenovo. This Linux software is clean, and it is without any errors. When installing a new window, you will quickly determine if the problem is due to the operating system or any other glitch.

Disable Auto-On/Off Feature in Lenovo ThinkPad

There is a flip board system in the Bios that help in turning on the laptop. You need to reboot the laptop into the BIOS and disable the auto-on/off feature from the ThinkPad. Follow these steps to disable the setting and make sure that your laptop has 50% charging or more to prevent it from battery running out during the procedure;

• Shut down your laptop and unplug it entirely but close the lid.
• Press the power button first and then press the BIOS key right away.
• You can access the BIOS key by using F2 or F2 plus Fn key. Usually, pressing F2 is enough to enter the BIOS menu.
• As soon as you hear a beep sound, stop pressing the F2 button.
• Find the configuration window from the menu by using the arrow keys on the keyboard.
• Then find flip to boot from the configuration menu and select the flip to Boot option. Now, press the enter key from the keyboard.
• You can disable the auto on/off button and then press enter again.
• You have successfully disabled the flip-to-boot option.
• Now, go to the exit menu, select the exit save change option, and then select yes.

After following all these steps, your laptop will automatically shut down or restart. You can then turn on the windows and check the laptop’s working. The auto turn-on/off feature will not affect the laptop’s performance.

Uninstall Pirated Program

You may have installed several pirated programs on your laptop, and you need to get rid of them as soon as possible. These prated programs invade privacy and break down your software and other premium programs. Follow these steps to uninstall the pirated program;

• Go to the control panel from the start menu
• Click on uninstall a program option
• Choose the program causing damage to your privacy and uninstall it from there.

Final Thoughts

This article contains a list of information and solutions that help you solve your Lenovo laptop won’t turn on problem. You don’t need to give up immediately after you face a minor problem; you can fix it yourself by checking the system and following the guide from this article.

There is a possibility that the old reboots might not work, and you will have to use your tool kit to solve the internal hardware problem. You might need to check all the updates of your Lenovo setting before bringing it back from the technician shop. You also need to check the latest Lenovo IdeaPad and upgrade it if available in the market.

Frequently Asked Questions

Why Won’t My Lenovo Laptop Turn on, But the Power Light Is On?

There is a possible residual charge in the motherboard, and you need to press the laptop’s power button for 30 seconds to remove all the residual charge. Doing so will reset the BIOS, and the functioning will resume if there is any problem. You can also re-assemble the laptop and connect it to the charger to give it a power shock.

What are the Common Problems with Lenovo Laptops?

There are widespread problems with Lenovo laptops, such as; no power, the keyboard not working, Wi-Fi not working, and overheating. You might also face pirated OS, blank screen and other screen issues, hard drive not detected, and other software and hardware issues. These issues are not very big if detected earlier and taken care of. But, if these problems persist, they can destroy the interior of your laptop and all its working.

What is Lenovo’s Black Screen of Death?

If there is a loss of connection between the display of the screen and the windows operating system, you will have a black screen of death issue. You can fix this issue by pressing Windows (?) + Ctrl + Shift +B. By pressing this, the display mode of the laptop will reset.